The mineral topaz is one of the more widespread gem
minerals in the western U. S. and is valued by collectors for both display
specimens and faceted stones. At a
hardness of 8 (Mohs Scale), topaz, a silicate of aluminum with fluorine and
hydroxyl [Al2SiO4(F,OH)2], is the
hardest of the silicate minerals and therefore quite durable. However, it does have perfect basal cleavage
and so may fracture or split along that plane.
This brittleness is a common problem if the stone is roughly handled, either
during faceting or after completion. Large
faceted stones are perhaps best displayed in pendants rather than in rings
since additional protection from “hard knocks” is provided. Although cut topaz will take a nice polish,
it has a weak dispersion factor (.14), especially when compared to diamond
(.44). Most often this comparison is
noted in a round brilliant cut as topaz simply lacks the “fire” associated with
diamonds and some other gemstones. To
offset these weaknesses, buyers note that the price of cut stones is usually
very reasonable and one can afford the purchase of some really large gems,
especially those of the colorless/clear variety.
Natural red topaz collected from La Ochoa, Durango,
Mexico. Width of specimen ~1.9 cm.
|
Red topaz set in ring, ~ 2.0 X 1.5 cm. My guess is the stone was heat treated and/or surface enhanced in order to produce the vibrant color..
|
Colorado has produced thousands of topaz specimens
from numerous localities with some gem crystals approaching five pounds in
weight (Eckel and others, 1997)! Local
rock club members are familiar with the best known source of Colorado
topaz---the pegmatites associated with the Pikes Peak Batholith (Precambrian in
age, around 1.05 Ga). Several of the
Colorado mineral societies have claims that may produce topaz and certainly
some society members have individual claims.
For many years a commercial topaz operation was open to the public near
Spruce Grove Campground as the Topaz Mountain Gem Mine. The intrepid rockhounders could purchase
“buckets” of material and hunt for the rough crystals. Today mines of the Glacier Peak Mining L.L.C.
at Topaz Mountain “produce the finest U. S. topaz crystals and cutting rough
…and perhaps the finest bi-color sherry and blue topaz ever found” (personal
communication, Joseph L. Dorris). If interested in collecting, I would encourage prospective topaz hunters to contact Pinnacle 5 Minerals L.L.C. at www.pinnacle5mineralscom
One of the more interesting aspects of the Pikes
Peak topaz is that many of the crystals are found in stream sediments and weathered
granite. Prospectors screen for the crystals rather than “pound rock”. These alluvial specimens are commonly frosted
on the surface but have not been transported a great distance from their
granitic source.
Other collecting localities associated with the
Pikes Peak Batholith include: Cameron Cone and Bear Creek Canyon in El Paso
County; Devil’s Head and Long Hollow (with giant crystals) in Douglas County;
Badger Flats area and the Tarryall Mountains in Park County; Wigwam Creek area
and the South Platte District in Jefferson County, the latter having produced
“sky-blue” crystals weighing over 50 pounds; and Glen Cove on the peak itself
in Teller County (Eckel and others, 1997).
However, mineral collectors in Utah (and other
states) are well aware of the “other” Topaz Mountain, the famous locality in
the West Desert of Utah. Mineral hunters
may owe its discovery to Captain James H. Simpson who served the Army Corps of
Topographical Engineers in the southwest part of the U. S. during the 1850’s
and was most active in Texas and New Mexico.
However, in 1858 he was assigned to the army of General Albert Sidney
Johnson during the “Utah War”. One of
his assigned tasks was to survey a new wagon road from Camp Floyd (the
encampment of federal troops southwest of Salt Lake City) to California that was
situated south of the more popular Humboldt River Road. Leaving Camp Floyd in October Simpson only made
it as far as the West Desert of Utah but “discovered” the Thomas Range, and
most likely Topaz Cove.
The West Desert of Utah is an interesting place (and
one of my favorite localities to explore) that displays a tremendous variety of
topographic and geologic features. The
area is part of the Great Basin (geographic term) or Basin and Range (geologic
term). This physiographic province
stretches from the Wasatch Fault at Salt Lake City (western boundary of the Wasatch
Mountains) westward to Reno (eastern boundary of the Sierra Nevada Mountains)
and from Idaho-Washington south into Mexico.
The Great Basin refers to the fact that very few streams breech the area
and most drainage is internal. The Basin
and Range designation indicates that large normal faults have created uplifted
block mountains (horsts) and down-dropped valleys (grabens). Popular thought is that the ranges are
generally composed of fossiliferous Paleozoic sedimentary rocks---for example,
the House Range with its famous trilobite collecting localities. However, the Great Basin also has experienced
extensive volcanic eruptions and some ranges are composed entirely of Cenozoic volcanic
rocks. That is the case of the Thomas
Range, the location of Topaz Mountain.
The volcanic history of the Thomas Range is quite
complex but includes: 1) eruption of flows and breccias from a caldera with
subsequent collapse ~40 Ma; 2) eruption of ash flows with filling of the
caldera ~32-38 Ma; 3) flows and ashes ~21 Ma; 4) faulting and tilting of the range
~7-21 Ma; and finally 5) the eruption of the topaz-bearing rhyolite ~6-8 Ma
(Lindsey, 1998). Gases percolating
through the cooling lava produced cavities called lithophysae and it was within
these fissures that topaz and other minerals were deposited. I believe the composition of these topaz
rhyolites (extrusive so fast cooling) are about the same composition as
topaz-bearing granitic pegmatites (intrusive so slow cooling.
Today Topaz Mountain is a named feature at the
southern end of the Thomas Range that has been set aside by the BLM as a public
collecting locality and is commonly known as the “Topaz Cove”. There are two ways to collect crystals: 1)
take a heavy crack hammer and “pound” on the rhyolite, especially in the
“honeycombed” areas--the lithophysae; or 2) walk the gullies and slopes looking
for crystals weathered loose from the host rock. The former approach produces the sherry- to
amber-colored crystals so prized by collectors.
Most have a single termination and are less than one-half inch in
length. With exposure to sunlight the
crystals will lose their coloration within a few weeks! The latter collecting approach, certainly the
least strenuous, will produce numerous clear (non-colored) crystals of various
sizes with at least some approaching an inch in length. Small termination points are common. Topaz belongs to the orthorhombic mineral
system but the termination points take on a variety of forms.
So, if you are interested in collecting examples of
Utah’s state gemstone at the “other” Topaz Mountain, travel to Delta, Utah, via
I-70, U. S. 50, I-15, north on U. S. 6 for about 6 miles, then west on the
“Brush-Wellman” road for 38 miles. Follow
the signs trending north and west on a gravel road for a few miles and you will
arrive at the collecting site—over 600 miles from Colorado Springs. Take along
the usual collecting accoutrements including a crack hammer, eye protection, a
screen, and “lots” of water. This is not
really a trip for summer months (heat and sun) and the area is isolated (cell
phones may not function). So, plan
accordingly.
A final note:
Rocks of the Thomas Range contain a number of other interesting
minerals. See Blog posting of 4/3/2011
describing bixybite.
REFERENCES
CITED
Eckel, E. B. and others, 1997. Minerals of Colorado: Denver Museum of Nature and Science and
Fulcrum Publishing.
Lindsey, D. A., 1998. Slides of Fluorspar, Beryllium, and Uranium
Deposits at Spor Mountain, Utah: U. S.
Geological Survey Open-file Report 98-524.
Wilson, J. R., 1995. A Collector’s Guide to Rock,
Mineral, and Fossil Localities of Utah: Utah Geological Survey Misc. Pub. 95-4.
A bi-color sherry and blue topaz crystal collected from rocks of the Pikes Peak Batholith, Tarryall Mountains, Park County Colorado. Stone is ~3 X 3 X 4.4 cm. Stone and photo courtesy of Pinnacle Peak t
A bi-color sherry and blue topaz crystal collected from rocks of the Pikes Peak Batholith, Tarryall Mountains, Park County Colorado. Stone is ~3 X 3 X 4.4 cm. Stone and photo courtesy of Pinnacle Peak t
Very interesting article.
ReplyDeleteAnd yes, the red topaz is most probably a treated stone.
I agree, the color could be due to diffusion or coating.
I found an article published by Dr. Schmetzer about treatments and resulting colors:
Surface coating of gemstones, especially topaz - a review of recent patent literature
And a site about blue topaz with a list of articles and patents:
Topaz - Literature (Articles & Patents)
I appreciate this article and the discussion on real topaz. The gem stones are beautiful.
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteThanks for sharing this lovely blog with us!
ReplyDelete