Tuesday, July 26, 2022

FROM THE RIFT: YOOPERLAND MINERALS

 

A dog doesn't try to give advice, or judge you; they just love you for who you are. It's nice to have someone who will just sit and listen to you. So sayeth Charlie Brown.

                                 Mr. Karl listens in either ear!

A Blog doesn’t try to judge you; it just lets you write what spews out from the inner recesses of your brain.  It’s nice to have a medium where a small audience may just sit and read to their heart’s content, or maybe just skip over it. Their choice; however, the writer has experienced an enjoyable day. Life is good.   So sayeth Mike.

So, I finished finding out how to warm my toes on a cold winter night. It is now time to continue my brief descriptions of new (to my collection) of Yooperland Minerals--grunerite was added June 24.  That is, minerals from the fantastic rocks of the northern peninsula of Michigan.  For those who have not read some of my previous postings (see August 2, 2019 for copper arsenides) about Yooperland, it is the UP (Upper Peninsula) of Michigan that is connected to the south part of the State by the Mackinac Bridge.  So, the Yoopers live north of Big Mac while the Trolls live under (south) the bridge.  This introduction to Michigan terminology was explained to me by my good Yooper friend Duncan.  The Yoopers also love Nordic winter sports. I mean what else is there to do when it snows for 10 months each year (other than ice fish)?  Duncan loves the skinny skis and is a highly competitive cross-country skier and always finishes well in the top Nordic ski event in North America, the 50k American Birkebeiner. In fact, he is classified as an Uberlegger with 41 Birkies (and counting) under his belt.

Yooperland (the UP) is connected to Troll Land (lower Michigan) by the Big Mac (the Mackinac Bridge). Public Domain sketch.


Counties in Yooperland. The Keweenaw Peninsula protrudes into Lake Superior. Public Domain photo.

Ontonagon County is in the most northwestern section of the UP, one of the largest counties in the state, and one of the least populated counties. I have camped several times in the county due to the scenery along the coast of Lake Superior and the ruggedness of the Porcupine Mountains, AKA the Porkies. 

 

Lake of the Clouds, Porcupine Mountains, Yooperland.  Photo courtesy of Michigan DNR.  For additional information visit Porcupine Mountains Wilderness State Park.

Most of the county is heavily forested and often covered with Pleistocene glacial drift.  However, the bedrock is exposed at places, especially along the coast and in river valleys, and is Middle Proterozoic (Late Precambrian) in age and associated with the Mid-Continent Rift System (see Posting October 31, 2013).  As in other parts of northern Michigan, especially the nearby Keweenaw Peninsula, these Rift rocks produce copper and silver along with a large variety of other non-ore minerals.


The MRS is centered in Lake Superior with two well-defined arms and one sort of trending west.  Map Public Domain (I think). 

Rockland is a sparsely populated township in Ontonagon County that is well known for its fall colors, orchards and cider mills, and pumpkin patches. It is also the home of the National Mine, a past producer of primary copper and secondary silver. According to the USGS MRDS (ID:W031505) the National was an underground mine with five shafts producing from a 2–8-foot tabular fissure of amygdaloidal basalt (Portage Lake Volcanics ~1095 Ma). Production started in ~1948, lasted for half a century, and yielded ~5,268 million tons of copper.

Among the gangue minerals from the National, barite seems the most collectible.  My specimen of barite, from an unknown collector, is a mass of transparent to translucent tabular crystals.

Barite crystals collected National Mine, Rockland Township, Ontonagon County, Michigan.  Width of crystal mass above  ~5 mm, specimen below 2.3 cm..

Near the National is the Mass Mine, an underground (three shafts), very small producer of copper from ~1849 to 1888.  Mining was sporadic during these years and in 1899 the Mine, along with Old Mass, Ridge, Ogima, Hazard and Merrimac Mines were consolidated into the Mass Consolidated Mining Company.  Evergreen Bluff Mining Company was added in 1911.  The Group went belly-up in 1919 after producing ~ 25,000 tons of copper.

My specimen from the Mass Mine is a mass (pun intended) of small crystals of clear quartz and green epidote mixed with dark hacky copper (including some small poorly formed crystals).  There appear to be other minerals present, probably pumpellyite (yellowish acicular crystals). A second specimen is a badly tarnished, convoluted, rather ugly piece of copper.

Width FOV ~4.7 cm.
Width FOV ~4.7 cm.

The copper deposits of the UP have a complex geological history that might be best understood by consulting the book by E.W. Heinrich, with an update by George Robinson. entitled Mineralogy of Michigan (2004 Michigan Technological University, A. E. Seaman Mineral Museum): All copper deposits are in rocks associated with the middle Proterozoic (late Precambrian) Mid-Continent Rift System.  The major copper producer is the Portage Lake Volcanics, a thick sequence (up to 9400 feet) of basalt, andesite, and felsite flows with interflow red rhyolite pebble conglomerates. Heinrich and Robison (2004) best described the ore formation: “although hosted by volcanic and sedimentary rocks, the copper deposits themselves are of hydrothermal origin…[The minerals] formed in permeable parts of the basaltic lava flows and conglomerates by open-space filling and replacement. Hydrothermal solutions (derived from infiltrated sea water?) …leached copper and other elements from the basalts, concentrated them, and deposited copper and other minerals as they cooled during their ascent.”  A complex history indeed.  

Just to the east of the mines in Ontonagon County is Houghton County, a territory that also extends about halfway up the Keweenaw Peninsula.  Like Ontonagon County, Houghton is home to trees and glacial drift and makes up a significant portion of Copper Country where, at one time, copper was king.

One of the Houghton  mines was the LaSalle Mine where copper was extracted from the Kearsage Amygdaloid, one of the vesicular basalt flows of the Portage Lake Volcanics.  In fact, the Kearsage was probably the richest (in copper) of the many basalt layers in Copper Country. The LaSalle operated from 1910-1920 and produced ~3.5 metric tons of copper.

Perhaps the most interesting thing about the LaSalle is the abundance and variety of gangue minerals, and as MinDat noted, the “site is especially popular with microcollectors.” My specimen from the LaSalle is a small piece of vesicular basalt with beautiful microcrystals of pistachio colored epidote. I also have a large, flattened nugget of tarnished copper. However, the epidote is a much nicer specimen to mount.

 A long fissure or vug filled with epidote crystals and scattered tiny acicular crystals of ?pumpellyite. Width of vug ~4 mm.

About a half mile from the LaSalle Mine is the more famous underground Laurium Mine that produced copper from the Kearsarge Lode (1907-1920).  I found it most interesting that the mine had a shaft reaching 1,660 feet.  MinDat noted that the “Laurium provides perhaps the best collecting in the Keweenaw, especially for the micro-mineral collector.”

One of the microminerals I have from the Laurium is saponite, a clay mineral of the Smectite Group and one that is related to the better-known clay mineral, montmorillonite. As with many clay minerals, saponite is difficult for me to identify since it seems similar to other fibrous microminerals forming in amygdaloidal cavities in Keweenawan basalt. Mostly I depend on previous descriptive analyses of these microminerals and the photographs in MinDat.  For example. At first glance I thought the specimen shown in the photograph below was pumpellyite, a micro cavity filler in the basalt.  However, I ran across a MinDat photograph of saponite that appears to be almost identical to my specimen so saponite it is. 

I also note the “be careful” statement of Deer and others (1966): “optical methods alone are in general not reliable for identification of smectites [saponite].” That means a an ole paleontologist like me needs to understand:

Saponite: Ca0.25(Mg,Fe)3((Si,Al)4O10(OH)2-nH2O)

Pumpellyite: Ca2MgAl2[Si2O5OH][SiO4](OH)2(OH)

Saponite usually occurs in the basalts as spherules of acicular or bladed crystals that resemble puffballs, or spherules that appear solid botryoids; however, there are other shapes.  Some are snow white to colorless while others are gray or yellow but mostly some shade of green. The specimen I have is a broken spherule showing the mass of radiating narrow bladed crystals.

 Broken spherules showing radiating crystals of saponite.  Width FOV ~7 mm.

What’s a poor ole softrocker to do? Especially since there are specimens of pumpellyite rich in aluminum or ferrous iron or ferric iron or manganese---just change the cations. Heinrich and Robinson (2004) stated, “it is impossible to say which species of pumpellyite is present without complete chemical and structural data.” So, to answer my question—make friends with a mineralogist proficient in using electronic gizmos like an XRD!  

It seems most Keweenaw specimens of pumpellyites are Mg- dominant and are groups of radial prismatic crystals usually white to brown to green, or masses of scattered needle-like crystals thrown together in a jackstraw arrangement. It also is tough, at times, to distinguish pumpellyite from epidote or chlorite group minerals. Whatever, they are very tiny crystals found in broken vesicular cavities.  

Vesicular basalt filled with mass of jackstraw green crystals of pumpellyite? along with white "puffballs" of pumpellyite.The width of the "puffballs", above and below are ~1mm or less. 

 

Unfortunately, I do not have a specimen of chlorastrolite, a variety of pumpellyite described by Heinrich and Robinson (2004) as “ beach pebbles showing a finely radiating or stellate pattern of slender green crystals.  The pebbles are derived from vesicle fillings in the amygdaloidal basalts of Copper Country.” In 1972 chlorastrolite (AKA Island Royale greenstone) was designated as the official state gemstone.

Microcline of the variety adularia (KAlSi3O8) is a common potassium feldspar (K Spar) in Copper Country occurring in low temperature veins and other hydrothermal deposits (Heinrich and Robison, 2004). It is often a prominent gangue mineral and the bright red to pink crystals are easy to spot and observe in specimens. I have several specimens, all from mines in Keweenaw County near the top of the Keweenaw Peninsula, or its neighbor to the southwest, Ontonagon County.

Microcline var. adularia, Seneca Mine. width FOV ~7 mm.  Note green unknown mineral bordering adularia.

  

Epidote and adularia in a vug from Seneca Mine, Keweenaw County. Width FOV ~6mm.

I don’t have a list of zeolites (porous aluminosilicate minerals) that are found in Copper Country; however, one of the best known of the group is analcime, a hydrous sodium aluminum silicate [Na(AlSi2O6)-H2O].  Most crystals of analcime that I have observed in various rocks are usually white or colorless, medium hard (~5.0 Mohs), translucent to transparent, often well formed, trapezohedral crystals, and come from late-stage hydrothermal fluids filling vugs in basalt.  Others are formed as precipitates in lake sediments. Interestingly, at several mines in the Copper Falls area in Keweenaw County the analcime crystals are bright red in color. They are also a very late stage, post-copper deposition, mineral (Heinrich and Robinson, 2004).


Analcime crystals from Copper Falls Mine. Width FOV ~4 mm.

Native silver seemed to occur in almost every copper mine found in Copper Country. It was produced in large amounts but rarely recorded accurately in production reports (due to high grading by mine workers and supervisors). In fact, some mines were so rich in silver that originally, they were designated as silver mines.  It seems likely that the silver in vesicular basalt probably formed later than the copper (Heinrich and Robinson, 2004).

One of the more collectable specimens from Yooperland is a copper-silver mix (formally known as halfbreeds). On 29 September 2012 a long discussion was held on MinDat and the best summary was presented by Paul Brandes (remember that halfbreed is now viewed as a derogatory term and is not used in the mineral world):

The Keweenaw deposits were formed in a relatively low temperature, low grade metamorphic environment where hydrothermal fluids were being generated. These fluids, which picked out copper and silver ions from the basalts, were channeled and deposited in their present position through permeable conglomerates and the broken tops of basalt flows. Copper and minor silver were the predominant metals deposited, with very rare chalcocite, digenite, and other copper sulphides due to a lack of sulfur.

There is a quite a bit of talk about what exactly is a halfbreed. Some folks regard them as any specimen with silver and copper together. Others believe they are an amalgamation, whether by natural or mechanical means, of copper and silver in the form of a nugget or other rounded form. Still others regard glacial float copper with silver on them as halfbreeds; so which is the correct usage of the term??? In my perfect world of nomenclature, I use the term “halfbreed” strictly for the nuggets of copper and silver that have been pounded together during the stamping process to remove the host basalt rock from the metal. Natural nuggets and boulders of copper with occasional silver which have been rounded and transported by glacial activity have been given the term “float copper”, while specimens of intergrown copper and silver are simply known as “native copper with silver” or “native silver with copper”, depending on the amount present in a specimen. Unfortunately, the term halfbreed is used far too interchangeably between all three types by most folks, so there is no real conciseness and therefore no consistency in its use.

Copper-silver mix from stamp mill, Houghton, County. Width specimen ~1.4 cm.

Heinrich and Robinson (2004) also noted (after Olson, 1986) that most of the copper-silver specimens on the market are products of the stamp mill.  That certainly would seem to be the case with my specimen collected from “Houghton, Michigan.” Regardless of the lack of more specific information, I am happy to have the now somewhat uncommon specimen.

Besides the copper-silver nuggets, silver from Copper Country is found with habits ranging from wire silver (rare to absent) to herringbone and spike aggregates (common) to octahedral to dodecahedral crystals.  A few rare cubic crystals have been found in a prospect pit near the Petherick vein at Copper Falls (Heinrich and Robinson, 2006).


Native silver cubic crystals glued on a black mount.  Width of total cluster of crystals is ~3 mm.

This last sentence is of great interest to me since a few years ago I picked up a micromount put together by Art Smith, mainly since it was cheap and was silver (a collectable mineral). The label said, “Silver, near Copper Falls Mine, Keweenaw County, Michigan.” Much to my surprise the mount consists of several nicely formed silver cubes. This is my idea of a great purchase!

Finally, I would be remiss without mentioning a nice specimen of Lake Superior Agate. One usually thinks of the agates as being collected from the shoreline gravels and adjacent gravel pits of Lake Superior, especially the North Shore in Minnesota.  However, the Lakers have a fairly widespread distribution since glacial action (Pleistocene) moved specimens into adjacent Wisconsin, Michigan, Iowa, Missouri, Nebraska, and South Dakota and there are reports of a Laker or two from Kansas.  In addition, Pabian and others (2006) noted Lake Superior-type agates have been found in deposits of the Mississippi River as far south as Louisiana.  Essentially any “gravel pit” in the glaciated region, or along the Mississippi River, has the possibility of producing a Laker. See Posting on August 1, 2013,   describing: 1) Lakers from Wisconsin; and 2) August 19, 2013, a Laker from South Dakota.  


Reverse and obverse views of a lake Superior agate.  Width ~3.1 cm

 My specimen does not have good provenance information except that it came from Keweenaw County.  One might assume a Lake Superior beach, but it could have been found in the glacial till. The specimen label appears “old.”

In the recent July/August 2022 edition of Rocks and Minerals Tom Rosemeyer published News from the Keweenaw, Recent Finds in Michigan’s Copper Country. This article is the 29th in a series describing minerals of Copper Country. All articles are listed in the July/August edition.

REFERENCES CITED

Heinrich, E.W. with G.W. Robinson, 2004, Mineralogy of Michigan: Michigan Technological University, A. E. Seaman Mineral Museum.

Olson, D.K., 1986, Michigan silver: Mineralogical Record vol. 17.

Pabian, R., B. Jackson, P. Tandy, J. Cromartie, 2006, Agates: Treasures of the Earth:  Firefly Books, Limited.


Tuesday, July 5, 2022

SOAPSTONE: WARMING THE TOES

 

To get away from one's working environment is, in a sense, to get away from one's self; and this is often the chief advantage of travel and change.— Charles Horton Cooley


Check out my furry friend, a frequent visitor looking for, but never finding, a snack.  I could not load the security camera video so this is a snapshot as he was heading to the small front porch. I think he said, I hear there is a Bear Market on Wall Street? Got any rotten meat around here?

Noted in my last posting was the fact that I was sort of coming out of dormancy and getting my mojo back—after spending a couple of months traveling, reading, watching Spotted Towhees scratch around in the “wild part” of my yard, and checking out the Black Bears visiting the front yard in the evening.  Might not seem too exciting; however, relaxing it was.  Now I have a pile of minerals that need to be examined in greater detail. And I found out that not all interesting minerals need to be purchased from a rock/mineral store or collected from outcrops!  Case in point: I was rummaging around my Cabinet of Natural Curiosities and came across a green/gray slab of rock with a handle.  I remembered that it came from a farm auction in rural Missouri (early 1990s) and since no other person bid, and the auctioneer knew I was a sucker for strange gadgets, gaveled it down for Mike at a buck. At least I knew what it was—not the case with several of my auction gadgets.  

The sawed and polished slab is an old warmer that people used to heat their beds and buggy floors as a way to help keep their feet warm.  Since these gadgets were extremely popular in the 1800s (in the U.S.) they predated anything related to heaters found in vehicles with internal combustible engines.

These footwarmers were made from soapstone, a rock that has been used for centuries as a medium for carvers—from small ornaments to eating bowls to large art pieces. A metamorphic rock, soapstone is essentially a “dirty talc.”  That is talc, a [magnesium silicate [Mg3Si4O10(OH)2] is included with several other minerals such as chlorite and various amphiboles. It is sort of a “mixed up rock” with a variable chemical composition (the amount talc ranges from ~30% to ~80%) that formed during the metamorphism of ultramafic rocks (such as dunite and Serpentine Group minerals) along subsiding plate boundaries.

Since soapstone is “sort of” a massive variety of talc with included minerals, the physical characteristics vary. Colors of massive talc range from colorless to white to shades of gray, green and brown.  Soapstone is usually a gray to greenish gray color with foot warmers often displaying a dark patina due to various episodes of heating. Both massive talc and soapstone have a waxy to greasy luster and feel slick or soapy. Talc is listed as the softest mineral on the Mohs scale coming in as number 1. However, soapstone, with its variable composition of included minerals, also has a variable hardness.  Soapstone mined and cut into countertops, tile, and other architectural items has ~30% talc and hardness ranges up to ~5 (Mohs). Carving soapstone may have ~80% talc and a hardness of ~1-2 (Mohs). Although talc is often called soapstone (due to the soapy feel), strictly speaking they are different as talc is a mineral while soapstone is a rock with a variable composition (but always including talc).

Soapstone and massive talc, usually known as steatite, have been used by various civilizations for centuries. The softer steatite was usually carved into various ornaments while the harder soapstone was used for bowls and cooking pots, oil lamps, smoking pipes, grave markers and a variety of other items. Soapstone and steatite have played a major part in the lives of people on every continent for millennia.  It is easy to carve (statues), is durable (bowls), has a high heat storage capacity (footwarmers), is heat resistant (bowls of smoking pipes keep cool), and has unique electrical characteristics (used for insulation of electrical wiring and components). Soapstone, and steatite, seeming a simple mineral/rock to most is actually quite wondrous.


Soapstone footwarmer with metal handle. U.S. quarter for scale.

And that brings me back to soapstone footwarmers. Almost all footwarmers seen in museums and antique stores are slabs of soapstone (not softer steatite), greenish gray to gray in color, about 10 inches by 7 inches by 1 inch in size with a metal handle.  The most coveted by collectors are those with an original cloth (linen) sack covering. As for the original source of the soapstone in my collection---hard to tell as the specimen lacks factory marks. In the U.S. there have been large soapstone mines in Pennsylvania, Vermont, Virginia, and Massachusetts—take your pick.

KEEPING THE TOES WARM

Mizzou farm auction

A green soapstone gavels down

Old time footwarmer

Friday, June 24, 2022

CELEBRATING GRUNERITE FROM YOOPERLAND

 



The Colorado Springs Mineralogical Society (CSMS) celebrated 2022 by holding their annual (except for a Covid postponement) Pikes Peak Gem, Mineral, and Jewelry Show.  As best I could count (a little tough after 10 fingers), 56 vendors were present at the Norris Penrose Event Center.  In addition, ~14 exhibits displayed a variety of minerals, fossils, and gems. The Colorado Gold Panners had a couple of panning troughs filled with sand, gold, and nifty minerals that attracted a variety of participants from 2-100 years old or so. The local Florissant Fossil Beds National Monument represented the Bureau of Land Management, the U.S. Forest Service, and the National Park Service.  David and his crew of workers spent three days trying to attract new members into the CSMS Pebble Pups and Earth Science Scholars programs by displaying everything a kid might be interested in, including dinosaurs. And finally, the Silent Auction, the most popular table in the Show, sold hundreds and hundreds of specimens to children and adults alike—everyone went away from this activity happy. Congratulations to Show Chair Lisa and Prez John who recruited a great cast of volunteers.

Open the doors and let in the crowd. June 2022 CSMS Show at Norris Penrose Center in Colorado Springs.
 

My prior commitments kept me out of the Show except for a couple of short stints; however, the attendance seemed pretty amazing.  People are tired of staying home due to Covid and what better activity to “get them out of the house” than visiting displays of fantastic rocks, minerals, fossils, and gems.  

I did find a few specimens that made it home to my cabinet of curiosities, but nothing that a curator/curatrix would display in the Natural History Museum.

I decided to increase my collection of minerals from the Northern Peninsula of Michigan—Yooperland as I noted in several other postings.  One of the more interesting acquirements from D’Angelos down in Trinidad was an amphibole known as grunerite.  The first question that may come to a reader’s mind is, “what is an amphibole.”  My answer is pretty vague as identifying an “amphibole” in my beginning Physical Geology class was confusing to say the least.  Amphiboles have now been elevated to Supergroup status by the International Mineralogical Association and contain two Groups divided into several Subgroups and a plethora of individual minerals.  Amphiboles are silicate minerals containing SiO4 tetrahedra with cations of iron and/or magnesium—plus a variety of other minor constituents.  Individual minerals often form prismatic or needle-like crystals and may crystallize in either the Monoclinic or Orthorhombic Crystal Systems.  In addition, amphibole minerals may form in either igneous or metamorphic rocks; hornblende may be the “best known” mineral.

My confusion in Physical Geology, and later Mineralogy, was usually due to the confusion of amphibole minerals with the similar looking pyroxene minerals such as augite.  Competent mineralogists will gently explain that amphiboles contain, in their atomic structure, a double chain of tetrahedra while pyroxenes have a single chain, and that amphiboles contain either hydroxyl (OH), fluorine (F), or chlorine (Cl).  Try explaining that to a beginning geology student still licking clear specimens trying to identify halite or calcite! So, we were taught to identify minerals of the two groups by examining cleavage angles.  Amphiboles cleave at an oblique angle, about 120 degrees, and pyroxene cleavage fragments are about 90 degrees and almost form a "square".

Grunerite is a common mineral if located in metamorphosed iron formations, and occasionally in other metamorphic rocks.  It is an iron rich amphibole [(Fe2)(Fe5)(Si8O22)(OH)2] in solid solution with the magnesium (replacing the iron) rich cummingtonite (also a metamorphic mineral). As far as I can determine there are no named minerals between cummingtonite and grunerite. Hawthorne and Oberti (2006) defined the boundary as Mg:Fe=1:1.


Different views of grunerite sprays in black magnetite. Length top ~7.7 cm.  Bottom ~6.6 cm.
 

Grunerite from Yooperland occurs as bronze to brown to brownish green to gray metallic bundles or radiating sprays of acicular or prismatic crystals.  It is difficult to determine but crystals have a hardness of around 5-6 (Mohs), a vitreous luster but a colorless streak. Rockhounds usually identify grunerite as the radiating sprays found on Banded Iron Formations. My specimen came from the Precambrian Bijiki Schist (Iron Formation) near Michigamme Lake in Marquette County, Michigan, and sprays are intimately associated with black magnetite.  I saw minor amounts of quartz in the specimen but could not locate garnets nor biotite nor chlorite (at times common associates). Heinrich (2004) described the Marquette Iron Ranges as former siderite-chert rocks now metamorphosed to grunerite-quartz + magnetite.


 
Photomicrographs of acicular crystals of grunerite and sub-millimeter crystals of black magnetite. Width middle and bottom ~1.6 cm.

REFERENCES CITED

Hawthorne, F.C. and R. Oberti, 2006, On the classification of amphiboles: The Canadian Mineralogist Vol. 44.

Heinrich, E.W. (with updates and revisions by G.W. Robinson), 2004, Mineralogy of Michigan: Michigan Technological University, Houghton.

 CELEBRATION OF A MINERAL

Beneath the earth’s crust
Hot metamorphic terrain
Grunerite forming
 

 For those readers who might have missed me (no posts for a couple of months), I have been in a state of aestivation, a period of dormancy where my writing has been inactive and has been replaced by the relaxation of reading causing a lowered metabolic rate. Much of the reading has been non-geological in nature in my quest to continue as a lifelong learner.  I even brought out one of my ancient lit class assignments (John Keats) and dwelled on the final stanza: 

When old age shall this generation waste,
                Thou shalt remain, in midst of other woe
Than ours, a friend to man, to whom thou say'st,
         "Beauty is truth, truth beauty,—that is all
                Ye know on earth, and all ye need to know.